Please read the full Instructions for Use provided with the product prior to using.
Please see instruction manual for detailed instructions.
• Setup the device as per instructions
• Do not use prior to last 3 weeks of pregnancy; or on the abdomen at any stage of the pregnancy. Consult your healthcare professional before use.
• As soon as labour begins, attach leads to the device
• Ensure device is switched off prior to attaching the electrode pads
• Clean & dry your skin prior to use to ensure sufficient adhesion of the electrode pads. Only apply to normal, intact, healthy skin
• Place the electrode pads on your back as per instructions. CH1 pads: Place these pads just below the bra line. CH2 pads: Place these pads just above the buttocks. Stimulation in the higher set of pads (CH1), is stronger than the lower set of pads (CH2). This is Intentional
• Press the ON button for 3-5 secs (LCD screen will be activated)
• Press the P button to choose a program. Use the arrows to increase/decrease intensity as required
The unit has the following programs:
-Program A - designed to provide a pulsing sensation that triggers the release of endorphins, relaxing you and relieving you from pain.
There are two modes:
- A1: for use between contractions.
- A2: for use during contractions.
Use the BOOST button to switch between the two modes at any time.
You should stay in program A as long as possible, but when your contractions intensify and become more frequent you can progress to program B
-Program B - provides a stimulation pattern which is set to block the heightened pain.
There are two modes:
- B1: for use when contractions intensify and become more frequent.
- B2: for use when you experience a strong contraction, it provides a constant tingling sensation and is triggerred by pressing the BOOST button.
If you find programs A and B do not meet your needs for pain relief there is a third program C, which provides a higher level of pain relief.
-Program C- provides a higher level of pain relief.
- C: is continuous
- C-AP (Active Power Ramp): pressing and holding the BOOST button will ramp the power or level of intensity during the final contractions to give intense pain relief. Release the BOOST button when required.
STORAGE INSTRUCTIONS
-25°C to +40°C / 15 to 93% RH (non-condensing)